SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Not going into gear
/cgi-bin/YaBB.pl?num=1328558426

Message started by Fawlguy on 02/06/12 at 12:00:26

Title: Not going into gear
Post by Fawlguy on 02/06/12 at 12:00:26

I just replaced cam chain ect.... Bolted everything back up but i'm not able to shift it into gear by hand with the shifter lever. I'm sure it's a simple mistake I must have made somewhere just don't know where.

Title: Re: Not going into gear
Post by verslagen1 on 02/06/12 at 13:41:52

Rock the bike back and forth to line up your dogs.

about as clear as ect?

Title: Re: Not going into gear
Post by Fawlguy on 02/06/12 at 14:28:30

Ok, I've still got it on the bench. Ect.... standard broken cam chain replacement resulting in removing everything to put it on. Guess I'll button her back up and toss it back on the bike and see rocking it back and forth works... Thanks

Title: Re: Not going into gear
Post by verslagen1 on 02/06/12 at 14:32:47

OK, just rotate the drive pulley while operating the gear lever

Title: Re: Not going into gear
Post by Fawlguy on 02/07/12 at 08:29:55

Worked just like you said. Thanks