SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> ebay risers fitment
/cgi-bin/YaBB.pl?num=1327367253

Message started by kuri77 on 01/23/12 at 17:07:33

Title: ebay risers fitment
Post by kuri77 on 01/23/12 at 17:07:33

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170678545302&category=35592&_trksid=p5197.c0.m619#ht_1103wt_642

Anybody used these or know if they will work without any changes to cables, hoses or wires?

Title: Re: ebay risers fitment
Post by verslagen1 on 01/23/12 at 17:12:56

1st off... they're for 7/8" bars.
2nd....... hole pattern between 7/8 bar clamps and 1" are different usually.

So no... don't think they'll fit.

Title: Re: ebay risers fitment
Post by kuri77 on 01/23/12 at 21:35:19

Missed the 7/8 inch part just saw the LS650 in the title. Did older Savages have that size handlebars? Or is it just an error on seller's part?

Title: Re: ebay risers fitment
Post by EJID on 01/23/12 at 21:50:11

76686F742A2A1D0 wrote:

Missed the 7/8 inch part just saw the LS650 in the title. Did older Savages have that size handlebars? Or is it just an error on seller's part?

Pretty sure it's a seller's error. All Savage/S40 bikes have 1" bars the older Savage dirt bikes from the 70's might be 7/8" but I'm not sure.

Title: Re: ebay risers fitment
Post by brucey on 01/24/12 at 11:13:17

Those are not normal risers, it looks like they screw into existing risers to change the position of the bars. It seems to me they would not look very nice (just my opinion), your better off with some regular risers for 1" bars

Title: Re: ebay risers fitment
Post by drums1 on 01/25/12 at 10:51:01

Not to mention the twin bolt mount at the bottom. Ours are a single bolt mount.

Title: Re: ebay risers fitment
Post by Savage_Rob on 01/25/12 at 12:14:14

These are some that Lancer pointed out to me years ago and I've been using since. I went from buckhorn bars to wide drag bars with these. They have a slight pullback. Hmmm, I think they're even the same price they were back then.

http://www.jirehmetric.com/catalog/34-119.jpg (http://www.jirehmetric.com/servlet/Detail?no=2589)

Title: Re: ebay risers fitment
Post by kuri77 on 01/26/12 at 19:56:00

Thanks for the info. So who makes them?

Title: Re: ebay risers fitment
Post by Savage_Rob on 01/27/12 at 07:06:36

3B2522396767500 wrote:

Thanks for the info. So who makes them?

Just click on the image.

Title: Re: ebay risers fitment
Post by kuri77 on 01/27/12 at 19:25:58

Doh! Thanks.