|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> fork protector removal /cgi-bin/YaBB.pl?num=1323922918 Message started by beacon on 12/14/11 at 20:21:57 |
|
Title: fork protector removal Post by beacon on 12/14/11 at 20:21:57 Any idea how to remove the vertical black-plastic fork protectors without destroying them or the sliders? I've got the sliders off the forks but can't figure out how to remove the things so I can resuse them. |
|
Title: Re: fork protector removal Post by justin_o_guy2 on 12/14/11 at 22:52:34 They arent resusable, |
|
Title: Re: fork protector removal Post by built2last66 on 12/14/11 at 23:03:47 You have to take the front wheel off and slide them off.. I cut mine off with a razor blade scraper, just make a little groove, then a deeper groove, then you can basically pull it off the rubber is so soft... I cut em off and put on a Super Brace with the fork guards. |
|
Title: Re: fork protector removal Post by arteacher on 12/15/11 at 03:46:18 If you want to re-use them you have to tap them up with a piece of wood till they are loose on the fork tubes, then remove the tubes from the trees and slide them off. |
|
Title: Re: fork protector removal Post by sbaugz on 12/15/11 at 04:16:32 2823232A2629283233470 wrote:
what he said. I got mine off the same way and they are reusable. |
|
Title: Re: fork protector removal Post by built2last66 on 12/15/11 at 08:33:45 Opps I said front wheel.. I've never taken them off |
|
Title: Re: fork protector removal Post by justin_o_guy2 on 12/15/11 at 12:39:57 I did not know they were resusable, |
|
Title: Re: fork protector removal Post by wombat on 12/17/11 at 08:00:03 Just tried the "hit it with wood and a hammer" technique and it worked! What a surprise. Parts are totally reusable. 24353622302D570 wrote:
what he said. I got mine off the same way and they are reusable. [/quote] |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |