SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Cafe >> How to drill a square hole... /cgi-bin/YaBB.pl?num=1323231881 Message started by verslagen1 on 12/06/11 at 20:24:41 |
Title: How to drill a square hole... Post by verslagen1 on 12/06/11 at 20:24:41 I bet you guys can already do this... http://www.youtube.com/embed/ALiqAXiTQBg |
Title: Re: How to drill a square hole... Post by Boofer on 12/06/11 at 20:39:52 You can, too, in wood. It takes a mortiser bit. The mortiser bit is like a chisel and drill bit in one. It is more a drilling-chisel than a machining action. Early on in the film it showed the CADCAM instructions, i guess for the CNC machine? Good post. Our motorcycles have vastly improved over the last hundred years thanks to innovations such as the one you showed us. |
Title: Re: How to drill a square hole... Post by bill67 on 12/07/11 at 04:32:02 I never had a problem drilling square holes,But I've been looking for square bolts to put in them,anyone know where to get the square bolts. |
Title: Re: How to drill a square hole... Post by EJID on 12/07/11 at 07:22:31 717A7F7F2524130 wrote:
I have the opposite problem...I keep trying to put the round pegs in the square holes :-? |
Title: Re: How to drill a square hole... Post by arteacher on 12/07/11 at 07:32:27 Oval holes are my specialty. ;D |
Title: Re: How to drill a square hole... Post by justin_o_guy2 on 12/07/11 at 07:37:58 Ohh Good Grief,, I watched that clip & started hitting others,, theres a lifetime of interesting stuff out there.. "printed" objects, machining projects, gear systems, different engine prototypes,, crap,, I feel so inadequate! |
Title: Re: How to drill a square hole... Post by Gyrobob on 12/07/11 at 07:44:54 I can make square holes like that. I just use a normal drill and then square it out with a small file. No big deal, except that it takes about 7 hours per hole. |
Title: Re: How to drill a square hole... Post by bill67 on 12/07/11 at 09:09:11 Of course you can Gyro you just use your head for a pattern. |
Title: Re: How to drill a square hole... Post by Serowbot on 12/07/11 at 09:49:30 Us Savagers are too cool to be square... ;)... ... I'm generally happy to get a hole of any kind... :-?... |
Title: Re: How to drill a square hole... Post by dasch on 12/07/11 at 10:05:09 Boy, you guys are old if you yearn for holes... |
Title: Re: How to drill a square hole... Post by justin_o_guy2 on 12/07/11 at 10:20:11 Old enough to be thinking about how to avoid the rectangular hole. |
Title: Re: How to drill a square hole... Post by Oldfeller on 12/07/11 at 11:34:02 Purty cool --- the broaching industry doesn't like it very much though .... ;) |
Title: Re: How to drill a square hole... Post by dasch on 12/08/11 at 00:52:27 746B6D6A7770417141796B672C1E0 wrote:
Oh yeah! That... |
Title: Re: How to drill a square hole... Post by John_D FSO on 12/08/11 at 18:20:06 I knew if I looked enough I'd find something on this. Not the footage from Roy's actual show, but the same tool: [media]http://www.youtube.com/watch?v=tAaaLSJ6Ykk[/media] Drilling square and other shaped holes isn't exactly new technology for woodworking apparently! :D Woodright's Shop on PBS; awesome show! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |