SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Front turn signal wiring? /cgi-bin/YaBB.pl?num=1323191627 Message started by MotoBuddha on 12/06/11 at 09:13:47 |
Title: Front turn signal wiring? Post by MotoBuddha on 12/06/11 at 09:13:47 I'm replacing the stock turn signal/running lights with 2-wire aftermarket signals with no running lights. So, the stock wiring has a black, a black with white stripe and a gray. Which one is ground and which of the other two do I ignore? |
Title: Re: Front turn signal wiring? Post by Serowbot on 12/06/11 at 09:28:06 Black/white = ground Black = turn Gray = running (ignore) |
Title: Re: Front turn signal wiring? Post by verslagen1 on 12/06/11 at 09:51:36 The one that blinks is signal. |
Title: Re: Front turn signal wiring? Post by Serowbot on 12/06/11 at 09:52:48 4C5F4849565B5D5F540B3A0 wrote:
;D ;D ;D... |
Title: Re: Front turn signal wiring? Post by MotoBuddha on 12/06/11 at 09:58:11 4D5E4948575A5C5E550A3B0 wrote:
Ordinarily, I'd figure it out by trial and error, but with the Ryca mod and the bar-end signals I'm using, the connections will end up tucked under the tank. Meanwhile, the tank is also connected to the ignition and idiot lights, so it's kind of a pain to be removing and replacing it. Oh, the price of being cool. 8-) |
Title: Re: Front turn signal wiring? Post by verslagen1 on 12/06/11 at 10:03:36 I'd be looking for a dummy ig switch to set up with. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |