SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Easy-off seat mod with rubber bumper support /cgi-bin/YaBB.pl?num=1320985619 Message started by kuri77 on 11/10/11 at 20:26:59 |
Title: Easy-off seat mod with rubber bumper support Post by kuri77 on 11/10/11 at 20:26:59 Raised seat in front 1 3/4 inches which left big gap. 1-Took rubber bumpers off front of seat. 2-Screwed them into the holes on the frame after a little resizing on sander. 3-Pulled rear bumpers to stretch rubber then put in 2 thick nylon washers. 4-Got some discarded IKEA furniture bolts and red locktited a nut on each. Then rounded them on sander. I always carry a fold up allen wrench set in my pocket so can finger tighten bolts then a little extra with the wrench. Easy to get out since they protrude past the edges of seat and up above rear light. All this in the pics. http://img.photobucket.com/albums/v709/kuri777/Suzuki%20Savage%20seat%20mods/2011-11-10Aoriginalrubberbumpers.jpg http://img.photobucket.com/albums/v709/kuri777/Suzuki%20Savage%20seat%20mods/2011-11-10Brepositionedbumpers.jpg http://img.photobucket.com/albums/v709/kuri777/Suzuki%20Savage%20seat%20mods/2011-11-10Cshimmedbumpers.jpg http://img.photobucket.com/albums/v709/kuri777/Suzuki%20Savage%20seat%20mods/2011-11-10Deasy-outIKEAfurniturebolts.jpghttp://img.photobucket.com/albums/v709/kuri777/Suzuki%20Savage%20seat%20mods/2011-11-10DeasyoutIKEAfurniturebolts.jpghttp://img.photobucket.com/albums/v709/kuri777/Suzuki%20Savage%20seat%20mods/2011-11-10EIKEArearbolt.jpghttp://img.photobucket.com/albums/v709/kuri777/Suzuki%20Savage%20seat%20mods/2011-11-10FIKEAsidebolt.jpg http://img.photobucket.com/albums/v709/kuri777/Suzuki%20Savage%20seat%20mods/2011-11-10Gsideboltprojectionoutward.jpg |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |