SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Regulator/rectifier islolation? /cgi-bin/YaBB.pl?num=1318988632 Message started by beacon on 10/18/11 at 18:43:52 |
Title: Regulator/rectifier islolation? Post by beacon on 10/18/11 at 18:43:52 Does the reg/rec (that black box with fins) need to be electrically insulated from its metal mounting point? If so, how is this done? |
Title: Re: Regulator/rectifier islolation? Post by verslagen1 on 10/18/11 at 19:26:59 no, it comes mounted to the fender from the factory with no isolation. however, one person had a short in it and it would work if isolated. |
Title: Re: Regulator/rectifier islolation? Post by thumperclone on 10/18/11 at 19:51:12 insulated ? must have ground... also act as suplemntal heat sink... |
Title: Re: Regulator/rectifier islolation? Post by Gyrobob on 10/23/11 at 14:26:01 697A6D6C737E787A712E1F0 wrote:
Does it make any difference if it is grounded or not? |
Title: Re: Regulator/rectifier islolation? Post by justin_o_guy2 on 10/23/11 at 14:50:30 IDK about those things, but it always mattered to me when I was grounded.. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |