SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> rear brake light switch assembly
/cgi-bin/YaBB.pl?num=1318295545

Message started by astroxzombie9 on 10/10/11 at 18:12:24

Title: rear brake light switch assembly
Post by astroxzombie9 on 10/10/11 at 18:12:24

i recently noticed my rear brake light wasn't working, and i traced the problem to the foot lever. the cable that actuates the brake light is not attached to the brake pedal/lever and i can't figure out what small parts i need to reattach it. anyone have this problem before and/or know where i can find a diagram to see what part i'm missing? thanks everyone

Title: Re: rear brake light switch assembly
Post by verslagen1 on 10/10/11 at 18:56:00

here's pic of what the end of the cable should look like...
http://i258.photobucket.com/albums/hh253/Gyrobob_theOriginal/Motorcycle/RYCA%20CS-1%20LS650%20S40%20Savage/RYCAbrakecablebrkt03a.jpg

Title: Re: rear brake light switch assembly
Post by astroxzombie9 on 10/11/11 at 12:04:04

that's what mine looks like, now how do i attach it to the pedal so the light comes on when i brake?

Title: Re: rear brake light switch assembly
Post by verslagen1 on 09/16/12 at 16:56:40

that washer thingy between it and the rubber boot goes on the pin the main brake cable attaches to.
http://oi45.tinypic.com/2vtwcxe.jpg