SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Ryca's catseye taillight on stock Savage
/cgi-bin/YaBB.pl?num=1317484803

Message started by kuri77 on 10/01/11 at 09:00:02

Title: Ryca's catseye taillight on stock Savage
Post by kuri77 on 10/01/11 at 09:00:02

Anyone put one on and if so got any pics? There's a couple of old style cats eyes on European bikes in the gallery but they don't appear to be LED and have a hard-to-distinguish, oversize mounting plate. I can make a minimal mounting brace like Ryca's for much less than the $40 they want.

Title: Re: Ryca's catseye taillight on stock Savage
Post by ezornes239 on 10/08/11 at 09:35:03

I'm interested in this as well. I want to strip off that stupid flashing tail light, the turnsignals and the chrome bars on the rear fender. I wonder if the cateye taillight would look alright mounted under the fender with the license plate. Get all the old holes filled in and fender repainted too.

Title: Re: Ryca's catseye taillight on stock Savage
Post by ohio thumper on 10/08/11 at 13:02:37

i have a catseye on my bike. its not led and it is side mounted. cant figure out how to get my pics on here though.

Title: Re: Ryca's catseye taillight on stock Savage
Post by Demin on 10/08/11 at 14:22:03

You can use the original bracket.Most aftermarket lights have the same mounting bolt spacing,which fits right where the mlicense plate light bolts in.You'll have to space the whole bracket down about 1/2 inch.
Non LED Snake eye light
http://p1.bikepics.com/2007/09/09/bikepics-1018395-800.jpg
LED Diampnd light.
http://p1.bikepics.com/2008/07/08/bikepics-1347151-800.jpg
Non Led Skull Catseye
http://p1.bikepics.com/2008/03/30/bikepics-1236178-800.jpg