SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Small wiring harness question
/cgi-bin/YaBB.pl?num=1316281860

Message started by MotoBuddha on 09/17/11 at 10:51:00

Title: Small wiring harness question
Post by MotoBuddha on 09/17/11 at 10:51:00

I was cleaning the grime off my wiring harness so I could put it back on my newly powder coated frame. I noticed a connector that had been folded back and taped to the rest of the bundle. It looks like it's held in place by the factory tape. I'm guessing it's for something US market bikes don't need. Anyone have any further light and knowledge about this?

http://i280.photobucket.com/albums/kk182/motobuddha/a2a3dfdb.jpg

http://i280.photobucket.com/albums/kk182/motobuddha/c64ce77d.jpg

Title: Re: Small wiring harness question
Post by arteacher on 09/17/11 at 14:02:44

Unwrap it and see if it connects anything.

Title: Re: Small wiring harness question
Post by MotoBuddha on 09/17/11 at 14:57:32

Could someone please post a photo of where and how this thing attaches -- particularly on a Ryca? I assume it's somewhere in the general area of the coil. Another relay clips onto the other end.

http://i280.photobucket.com/albums/kk182/motobuddha/cfc6f5e7.jpg

http://i280.photobucket.com/albums/kk182/motobuddha/1bcd37c4.jpg

http://i280.photobucket.com/albums/kk182/motobuddha/aacff15f.jpg

Title: Re: Small wiring harness question
Post by verslagen1 on 09/17/11 at 15:14:27

dont think there's any real good pic's...
but this this shows where it should be.
side stand relay...
http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1099317926

Title: Re: Small wiring harness question
Post by MotoBuddha on 09/17/11 at 15:36:07

Yeah, that's the general area I was trying to fit it. I guess I need to fiddle with it some more, try it turned the other way around, etc. Or just junk the metal bracket and zip tie the relays to the frame.