SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Carlo's rod mod /cgi-bin/YaBB.pl?num=1315496779 Message started by wombat on 09/08/11 at 08:46:19 |
Title: Carlo's rod mod Post by wombat on 09/08/11 at 08:46:19 One of the "customers bikes" on Ryca's website was done by Carlos in California showing a spring added to the rear brake rod. Carlo, if you are out there, please respond. I'd like to know how you did the mod. Or if anyone else has a clue. |
Title: Re: Carlo's rod mod Post by Oldfeller on 09/08/11 at 14:58:35 Ours has a coil type return spring around the rear brake lever hub. |
Title: Re: Carlo's rod mod Post by MotoBuddha on 09/08/11 at 15:10:03 60434B494A43434A5D2F0 wrote:
The type of spring Carlo used is to take up slack between the brake actuator lever and the rod that runs to the pedal. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |