SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> universal muffer /cgi-bin/YaBB.pl?num=1315397408 Message started by highlander10 on 09/07/11 at 05:10:07 |
Title: universal muffer Post by highlander10 on 09/07/11 at 05:10:07 Hello guys, Would this fit to a savage? Can someone send me the diameter of the header pipe? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=160616907655&ssPageName=ADME:X:RTQ:MOTORS:1123 Greetz Highlander |
Title: Re: universal muffer Post by thumperclone on 09/07/11 at 06:25:25 that will fit littlee smaller than 1 3/4 at the header to muff connection ive used a cut up alum can and copper rtv for the connection |
Title: Re: universal muffer Post by ROB CYCLE on 09/08/11 at 13:51:49 i have the same slip on come with adapter.if ican remember three different sizes. you will also have to make a new bracket because the one on your bike makes it point up. http://p1.bikepics.com/2011%5C06%5C12%5Cbikepics-2223358-200.jpghttp://p1.bikepics.com/2011%5C06%5C12%5Cbikepics-2223358-full.jpg |
Title: Re: universal muffer Post by drums1 on 09/08/11 at 14:20:22 Wow, that's one huge picture. If you downsize it to about 400kb, it will fit a lot better. |
Title: Re: universal muffer Post by rik on 09/08/11 at 15:48:40 Thats a good lookin muffler Rob,,, how was the sound after you put it on,,, do you like it better, and did you have to rejet? |
Title: Re: universal muffer Post by ROB CYCLE on 09/09/11 at 13:53:31 SOUND GREAT VERY LOUD.YES I HAD TO REJET |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |