SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Drag Bars? /cgi-bin/YaBB.pl?num=1314103602 Message started by Drifter on 08/23/11 at 05:46:42 |
Title: Drag Bars? Post by Drifter on 08/23/11 at 05:46:42 Any one know of a source for cheap 1 inch Drag or Superbike bars? Even a cheap set of s40 bars and risors? It seems 7/8 bars are everywhere and cheap....... |
Title: Re: Drag Bars? Post by EJID on 08/23/11 at 08:11:33 Drag Bars under $50 (http://motors.shop.ebay.com/i.html?_nkw=drag&_sacat=10063&Handle%2520Bars%252C%2520Levers%2520%2526%2520Mirror%2520Part%2520Type=Handle%2520Bars&_sop=1&LH_Price=..50@c&Body%2520%2526%2520Frame%2520Part%2520Type=Handle%2520Bars%252C%2520Levers%2520%2526%2520Mirrors&Part%2520Type=Body%2520%2526%2520Frame&_dmpt=Motorcycles_Parts_Accessories&_odkw=&_osacat=10063&bkBtn=&_trksid=p4506.m270.l1313) Some of these are 7/8 some are 1" so read carefully |
Title: Re: Drag Bars? Post by rik on 08/23/11 at 14:53:31 I am looking for a broomstick style drag bar,,, after I get that I will have the 1" bent drag style bar available off my 2007 S40 |
Title: Re: Drag Bars? Post by EJID on 08/23/11 at 14:58:54 213A383A3D242A3C3E3A3D34530 wrote:
Here's some Broomstick (http://motors.shop.ebay.com/i.html?_nkw=broomstick&_sacat=10063&_sop=1&LH_Price=..50@c&_dmpt=Motorcycles_Parts_Accessories&_odkw=broom&_osacat=10063&bkBtn=&_trksid=p4506.m270.l1313) style ones too (again some are 1" and some are 7/8" |
Title: Re: Drag Bars? Post by Joey4420 on 08/24/11 at 16:06:28 Not the best option in my opinion, but I just took off the drag bars on my 1987 Savage... and found they were just a 1" aluminium tube. Make me an offer and it will be in the mail to you. It worked well, but things did hit my tank. Just changed to a taller bar yesterday. |
Title: Re: Drag Bars? Post by horaizon1 on 08/25/11 at 02:46:56 I want to find the best price is the same, I know. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |