SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Ignition switch replacing /cgi-bin/YaBB.pl?num=1313416107 Message started by LarryC on 08/15/11 at 06:48:26 |
Title: Ignition switch replacing Post by LarryC on 08/15/11 at 06:48:26 If you had to replace an ignition switch, what would be the best way to approach it? >:( |
Title: Re: Ignition switch replacing Post by verslagen1 on 08/15/11 at 07:13:54 I'd approach it from the left side, then from the right and then some left again. Followed by alot of right. Get a switch, pull the battery, pull the bat box, air box so you have access to the switch harnace. |
Title: Re: Ignition switch replacing Post by LarryC on 08/16/11 at 07:36:23 Before doing anything.....call the dealer to see if the key code was registered with the original dealer. DUH........ Even a blind squirrel finds a nut occasionally! |
Title: Re: Ignition switch replacing Post by verslagen1 on 08/16/11 at 08:50:26 The key codes are standardized and are written on the original key and the ig switch. There's a locksmith on the internet that you can order keys from if you give him the code. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |