SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> ryca build carb and crankcase breather questions
/cgi-bin/YaBB.pl?num=1310874984

Message started by runrun on 07/16/11 at 20:56:24

Title: ryca build carb and crankcase breather questions
Post by runrun on 07/16/11 at 20:56:24

can anyone tell me what these two black hoses on an '02 carb connect to? my clymer manual isn't any help.

http://https://lh5.googleusercontent.com/-onGgqNiiVPQ/TiJbas-l08E/AAAAAAAABIY/rSpAzktFr1o/s144-c/DropBox.jpg

also, since the ryca build replaces the stock airbox with a k&n filter, what if anything does the crankcase breather connect to?

Title: Re: ryca build carb and crankcase breather questio
Post by verslagen1 on 07/16/11 at 21:43:09

those two hoses are vents, just tuck into the frame above the carb.

you need to get a breather filter.

Title: Re: ryca build carb and crankcase breather questio
Post by runrun on 07/17/11 at 05:14:47

thanks verslagen1

Title: Re: ryca build carb and crankcase breather questio
Post by Gyrobob on 07/17/11 at 05:29:04

796A7D7C636E686A613E0F0 wrote:

those two hoses are vents, just tuck into the frame above the carb.

you need to get a breather filter.

I asked Ryan (the RY in RYCA) about this. He said the CS-1 is stretching the definition of legal when it comes to venting the crankcase to the atmosphere like this.

Yes, we do need a filter,.. Verslagen is right. RYCA doesn't have anything in the kit that addresses this issue.