SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Cafe >> DIY fail... /cgi-bin/YaBB.pl?num=1310340569 Message started by Serowbot on 07/10/11 at 16:29:29 |
Title: DIY fail... Post by Serowbot on 07/10/11 at 16:29:29 :-?... http://i600.photobucket.com/albums/tt82/serowbot/Forgot.jpg |
Title: Re: DIY fail... Post by photojoe on 07/10/11 at 17:18:37 Ok, so what was it Botman? Arizona heat? Too much weekend celebration? You seem confused 8-) |
Title: Re: DIY fail... Post by runwyrlph on 07/10/11 at 17:32:55 plug out, oil out. plug in, oil in |
Title: Re: DIY fail... Post by justin_o_guy2 on 07/10/11 at 20:55:35 Ouch,, painful memories,, First oil change I did as an apprentice mechanic at the Ford house,,, I did that,,, man was THAT embarrassing! |
Title: Re: DIY fail... Post by SuperSavage on 07/10/11 at 22:50:05 New Jack $200, New pipes $400, fancy foot pegs $150. Forget to put the drain plug back in and coat your floor with precious synthetic oil...Priceless. 8-) |
Title: Re: DIY fail... Post by Wolfman on 07/11/11 at 00:37:10 Scared the Pee out of it did'nt you...lol |
Title: Re: DIY fail... Post by Sunchasers on 07/11/11 at 12:20:54 Ahhh... just put the drain plug in...scoop up the oil and pour it back in.... it'll be fine! ;) |
Title: Re: DIY fail... Post by arteacher on 07/12/11 at 08:27:43 I did that with my Land Cruiser once...... 8 liters of synthetic, about $65 worth of oil on the ground. :-[ |
Title: Re: DIY fail... Post by MrBrownTX on 07/14/11 at 16:09:57 I love it. ;D ;D |
Title: Re: DIY fail... Post by Ed L. on 07/14/11 at 19:23:46 Must of been blinded by all the crome :D Harleys always mark thier spot with a little oil ;) |
Title: Re: DIY fail... Post by John_D FSO on 07/20/11 at 01:25:34 I could be wrong, but it looks to me like it's a C50/Volusia (not going to go outside to see what the side of mine looks like). Plus it kinda looks to have a radiator. :-/ |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |