SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Cafe >> trip to the wreckers.
/cgi-bin/YaBB.pl?num=1310165130

Message started by arteacher on 07/08/11 at 15:45:29

Title: trip to the wreckers.
Post by arteacher on 07/08/11 at 15:45:29

Took a trip to the wreckers today to see if I could find a rubber cover for the brake pedal. I was thinking that a cover for an emergency brake pedal might fit. 2 1/2 hours in the hot sun crawling around wrecked cars and trucks tuned up nada. The closest I came was from the big Lincolns, but I would have to make the pedal smaller. It would look pretty good if I did that, though.
Has anyone used an aftermarket pedal cover? I have seen the thread regarding the cover from AutoZone, but we don't have them up here in da nort. Anyone using the Kuryakyn or similar? If so which one?

Title: Re: trip to the wreckers.
Post by bill67 on 07/08/11 at 16:05:39

I got one at and auto store it was for a ford emergency brake it fits good.I did glue it some.

Title: Re: trip to the wreckers.
Post by arteacher on 07/08/11 at 16:30:47


707B7E7E2425120 wrote:
I got one at and auto store it was for a ford emergency brake it fits good.I did glue it some.

That's the one I can't get up here.

Title: Re: trip to the wreckers.
Post by prechermike on 07/08/11 at 17:00:32

pm sent

Title: Re: trip to the wreckers.
Post by Serowbot on 07/08/11 at 17:16:25

We have a brake pedal?...    :-?...

;D ;D ;D...

Title: Re: trip to the wreckers.
Post by joscswny on 07/09/11 at 04:29:34

yuh, Serowbot.  Keep it on the bench so you won't lose it.

Title: Re: trip to the wreckers.
Post by thumperclone on 07/09/11 at 05:19:10

the auto zone part # is in the tech section

Title: Re: trip to the wreckers.
Post by Wolfman on 07/09/11 at 14:23:18

Cant remember if it was the brake pad or emergency brake pad of a chevy love pickup works.
Person just wanted a lil better grip the rubber(not the hard) sprayon bed liner works as well just spraying a couple coats on.

Title: Re: trip to the wreckers.
Post by Serowbot on 07/09/11 at 14:59:35

I've been thinking about grinding mine down smaller... I hardly use it, and it's a big clunky looking thing...
... or maybe drill some holes,... or both...

Someday... when I get around to it...  or not... :-?...

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.