SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Hose Dimensions
/cgi-bin/YaBB.pl?num=1309291442

Message started by greenmonster on 06/28/11 at 13:04:02

Title: Hose Dimensions
Post by greenmonster on 06/28/11 at 13:04:02

Hi folks. Why is it that every time I post on here it seems like I have to admit to having done something stupid?

This time, I took all my hoses off the engine and carb, since they look like they are about 25 years old. I was planning on on measuring them all and then precutting everything before I went to put the new stuff back. Unfortunately something about the best plans of mice and men came up.
The hoses have vanished.
Does anyone on here happen to know the sizes and lengths of all these?

Thanks in advance.

Title: Re: Hose Dimensions
Post by weracerc on 06/28/11 at 13:22:25

http://www.cheapcycleparts.com/model_years/4286-suzuki-1996-savage-ls650p/assemblies/117769

Title: Re: Hose Dimensions
Post by justin_o_guy2 on 06/28/11 at 13:43:55

Heck, thats nothing,, Ive seen all but 3 of the clutch cover bolts disappear,,,

Title: Re: Hose Dimensions
Post by Boofer on 06/28/11 at 18:34:17

Buy 2' of 1/4" gas hose, 2' of 5/16" and 2' of 3/8" gas hose, plus the two sizes of clear gas hose for weed eater and chain saw if you have them. You will need them eventually. And buy some small hose clamps, too. ;)