SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Torque Specs
/cgi-bin/YaBB.pl?num=1309135707
Message started by RpNSht on 06/26/11 at 17:48:27

Title: Torque Specs
Post by RpNSht on 06/26/11 at 17:48:27
Anybody have a chart of all the torque specs for the savage? Much obliged.

Title: Re: Torque Specs
Post by verslagen1 on 06/26/11 at 18:37:31
In the tech section
Check the link.

Title: Re: Torque Specs
Post by RpNSht on 06/26/11 at 19:44:33

68797764687F1C0 wrote:
Just in case the page gets lost:
                                                                                                                                                                                                                                                                                                                                                                                                                   
ITEMN-m|ft-lb
Rear
 axle nut		55.088.0|40.564.9
Engine
 drive pulley nut (RH)		100.0130.0|73.795.8
Exhaust
 pipe clamp bolts		18.028.0|13.320.6
Front
 axle nut		36.052.0|26.538.3
Front
 axle pinch bolt and nut		15.025.0|11.118.4
Spoke
 nipples		4.05.0|2.93.7
Rear
 driven pulley Mounting nuts		50.070.0|36.951.6
Rear
 driven pulley Side plate bolt		9.013.0|6.69.6
Driven
 pulley nut		100.0130.0|73.795.8
Shock
 absorber mounting nuts		20.030.0|14.722.1
Front
 caliper mounting bolts		25.040.0|18.429.5
Front
 caliper pad pin bolt		10.015.0|7.411.1
Front
 caliper bleed valve		6.09.0|4.46.6
Oil
 drain plug		12.018.0|8.813.3
Fork cap
 bolt		35.055.0|25.840.5
Cylinder
 head nuts (9mm)		29.033.0|21.424.3
Cylinder
 head-to-cylinder nuts (8mm)		23.027.0|17.019.9
Cylinder-to-crankcase
 nuts		8.012.0|5.98.8
Rocker
 arm shaft(exhaust) set bolt		8.010.0|5.97.4
Engine
 mounting No. 1 bolts and nuts		37.045.0|27.333.2
Engine
 mounting No. 2 bolt		70.088.0|51.664.9
Engine
 mounting No. 3 bolts and nuts		70.088.0|51.664.9
Engine
 mounting No. 4 bolt and nut		70.088.0|51.664.9
Engine mounting No. 5 Allen20.030.0|14.722.1
Cylinder
 head cover bolts		8.012.0|5.98.8
Cylinder
 head cover cover plug		25.030.0|18.422.1
Camshaft
 sprocket bolts		14.016.0|10.311.8
Camshaft
 chain tensioner set bolt		20.025.0|14.718.4
Camshaft
 chain tensioner Plate bolt		8.012.0|5.98.8
Valve
 adjuster locknut		13.016.0|9.611.8
Cylinder
 base nuts		8.012.0|5.98.8
Decompression
 lever nut		15.020.0|11.114.7



is this right? i was following it and broke 3 bolts...old bolts or bad info?

Title: Re: Torque Specs
Post by justin_o_guy2 on 06/26/11 at 19:47:57
Or outta spec wrench? You got a clicker or a beam?

Title: Re: Torque Specs
Post by verslagen1 on 06/26/11 at 21:09:25
Having a ssm and clymers on hand I don't refer to this but many have.
What bolts did you break? Many times its the. Nomenclature that gets you.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.