SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Wiring on the fender /cgi-bin/YaBB.pl?num=1308272102 Message started by ksthumper on 06/16/11 at 17:55:02 |
Title: Wiring on the fender Post by ksthumper on 06/16/11 at 17:55:02 Can I stuff the rectifyer (sp?) and all the other bits into the space behind the snorkle on the airbox? I looked around and couldn't find any posts about that. I'm getting ready to start pulling parts off and throwing on a trailer fender and hardtailing it. Starting small though ;D |
Title: Re: Wiring on the fender Post by bluesavage218 on 06/16/11 at 17:56:48 YES!!!!! I put mine under the seat. Really you can put it anywhere you want to. |
Title: Re: Wiring on the fender Post by ksthumper on 06/16/11 at 17:58:07 I'm not too savvy on the electrical side of things so I didn't know if it needed a stable ground or not from one of the screws. |
Title: Re: Wiring on the fender Post by bluesavage218 on 06/16/11 at 18:01:34 I have mine in with just one screw, but I've also had it just kinda floating when I was testing some stuff out so you should be fine however you want to do it. |
Title: Re: Wiring on the fender Post by babyhog on 06/17/11 at 05:27:55 but wherever you put it, it still needs air flow |
Title: Re: Wiring on the fender Post by 12Bravo on 06/17/11 at 08:33:23 Inside the air box is fine, a lot of us have ours there. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |