SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Crankcase breather specs? /cgi-bin/YaBB.pl?num=1307652469 Message started by MotoBuddha on 06/09/11 at 13:47:48 |
Title: Crankcase breather specs? Post by MotoBuddha on 06/09/11 at 13:47:48 Does anyone happen to know the rough specs for the volume and pressure of air coming out of the crankcase breather? I think I might have a line on a nice, small filter I could use since the stock airbox is gone. |
Title: Re: Crankcase breather specs? Post by Serowbot on 06/09/11 at 14:39:49 No spec for that,... any that fits the hose should do... |
Title: Re: Crankcase breather specs? Post by Boofer on 06/12/11 at 16:56:12 Auto Zone, Oreilly's, and Advance auto parts. I saw them in one of those recently and put them down in my brain for future use. ;) |
Title: Re: Crankcase breather specs? Post by TheSnakeLady on 06/12/11 at 17:20:02 Found this at advanced auto, it fits 3/8 to 1/2 id, I went to my local ace hardware and got a 1/2 od brass union and a couple small hose clamps and tada! Advanced auto has a couple other colors to choose from also. The stock breather hose is 1/2 so it fits perfect! ;) http://i211.photobucket.com/albums/bb234/the_snake_ladys_pics/100_1079.jpg Hope this is what you were looking for. :D |
Title: Re: Crankcase breather specs? Post by MotoBuddha on 06/12/11 at 18:17:53 The one I'm thinking about is about the size of a thimble, not much larger than the diameter of the breather hose. Very easy to hide away -- assuming it can breathe enough. I mean, if the hose itself passes enough volume to keep the crankcase happy, the filter doesn't need to be any larger in diameter, as long as the filtering material doesn't restrict flow. |
Title: Re: Crankcase breather specs? Post by CalisOsin on 06/13/11 at 08:21:46 Moto - What filter are you planning on using? I've been lookign for a smaller one to fit on mine as well. |
Title: Re: Crankcase breather specs? Post by MotoBuddha on 06/13/11 at 08:53:36 183A373228142832355B0 wrote:
Perhaps one of these: http://www.mcmaster.com/#breather-vents/=cqbjup |
Title: Re: Crankcase breather specs? Post by CalisOsin on 06/13/11 at 09:42:23 Perferct, thanks! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |