SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Risers, Rotor and End Caps.....
/cgi-bin/YaBB.pl?num=1307646524

Message started by drums1 on 06/09/11 at 12:08:44

Title: Risers, Rotor and End Caps.....
Post by drums1 on 06/09/11 at 12:08:44

I need 3 things.
1) A used or cheap front brake rotor.
2) Handgrip endcaps--to match the OE chrome ones. Someone had a link once to some cheap ones.....?
3) Handlebar risers with a forward shift. I added 3" risers this winter. But handlebars seem too close to me. Do they make risers with a forward shift? I like the height, but need them about 2-3" forward of where they are now. I thought about new handlebars with not so much pullback, but not straight across either.

Any idea's an any of these issues?

Title: Re: Risers, Rotor and End Caps.....
Post by arteacher on 06/09/11 at 14:05:02

Just get some risers with a pullback and turn 'em around.

Title: Re: Risers, Rotor and End Caps.....
Post by greenmonster on 06/09/11 at 14:16:54

oh my!

sorry, I couldn't help myself.

Title: Re: Risers, Rotor and End Caps.....
Post by drums1 on 06/09/11 at 18:23:59

arteacher, where to aquire risers with pull back--can't seem to find any anywhere. You got a link?

Title: Re: Risers, Rotor and End Caps.....
Post by verslagen1 on 06/09/11 at 18:38:34

3B2D2A322C6E5F0 wrote:

arteacher, where to aquire risers with pull back--can't seem to find any anywhere. You got a link?

The stock risers have pull back.

Title: Re: Risers, Rotor and End Caps.....
Post by Smokestack on 06/09/11 at 18:48:00

I've got the set of end caps I took off mine. I think I kept 'em, anyhoo. If I did, you can have 'em for the price of shipping. I live in Canada, though, so shipping is prolly more than they're worth....

PM me if ya want 'em, and I'll go see if I can find 'em. No promises, though...

Title: Re: Risers, Rotor and End Caps.....
Post by WD on 06/10/11 at 02:34:19

Go to the bike junkyard and buy a set of 750 Shadow risers, late 90s to mid 00s. Install them backwards. 3-4 inch total change in bar position AND better quality castings than Savage risers.

Title: Re: Risers, Rotor and End Caps.....
Post by justin_o_guy2 on 06/10/11 at 03:09:07

766374747F7C7E7F62657463110 wrote:

oh my!

sorry, I couldn't help myself.

Blast,, I was gonna do that...

Title: Re: Risers, Rotor and End Caps.....
Post by drums1 on 06/11/11 at 09:39:54

Verslagen, mines an '87. There is no pullback on the stock risers. 1" rise straight up from the tree. Buckhorn handlebars. I have found a few sets of 3" pullback riser on the net, but not sure if any will work on the Savage. None of them are listed as Savage specific. Most of them mount with a bolt through the bottom, instead of through the top of the riser, like the stock ones. Don't know if I trust that. Not sure what to do at this point.