SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> I NEED a Heel/toe shifter! new used fabricated!
/cgi-bin/YaBB.pl?num=1307025046

Message started by Quaddragon on 06/02/11 at 07:30:45

Title: I NEED a Heel/toe shifter! new used fabricated!
Post by Quaddragon on 06/02/11 at 07:30:45

I realize this is an old topic, I found an old thread for it, but found no answers. I have a fused ankle and not a lot of upward movement  in it, down works just fine. Does anyone know if there is a Heel toe Shifter out there or can fabricate one, of course I would gladly pay someone if they can fabricate one as well.

Title: Re:  Heel/toe shifter?
Post by Quaddragon on 06/02/11 at 11:51:58

Man I really want an S40 even found a nice 2007 with 4800 miles for 2700 but without  that heel toe shifter this bike is a no go for me.

Title: Re:  I NEED a Heel/toe shifter! new used fabricate
Post by papi_ocho on 06/02/11 at 13:22:21

With the right imagination anything is possible.

I have in my mind something like this.

drill a hole at 12 oclock on the factory shifter where it attaches to the tranny.
using a dowel rod(hardwear store)

Begin at the drill hole bend accordingly until its right where you want.
weld the dowel to the shifter where you drilled it. AND tada!

I used to have a pic of one but that was 4 years and 2 computers ago.

Title: Re:  I NEED a Heel/toe shifter! new used fabricate
Post by splash07 on 06/02/11 at 13:26:42

There may be some useful info in here, there are pics as well.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1152575569

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.