SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Throttle slop /cgi-bin/YaBB.pl?num=1307023902 Message started by molo on 06/02/11 at 07:11:42 |
Title: Throttle slop Post by molo on 06/02/11 at 07:11:42 I replaced the stock grips with Kuryakyn ISO (6235 universal 1” bars). The cable adjustment is maxed out at both ends but I still have a little slop. Any suggestions? Mike |
Title: Re: Throttle slop Post by arteacher on 06/02/11 at 11:36:33 On those grips there are two spots to put the cable into- double check that you put it in the furthest back (to the rear of the bike) slot. I installed them in my '07 with no problem at all. Properly adjusted there should be a max of 4mm play. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |