SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Help Identifying part - No clutch after re-assembl
/cgi-bin/YaBB.pl?num=1306103248

Message started by ocdave on 05/22/11 at 15:27:28

Title: Help Identifying part - No clutch after re-assembl
Post by ocdave on 05/22/11 at 15:27:28

Can anyone help me identify this part? It fell out onto the floor sometime during the tear down of my engine. I tore the engine down to replace a broken valve. Upon reassembly, I notice that the clutch arm on the right side cover doesn't have any tension. I didn't do any clutch work. I would appreciate any thoughts.http://www.bikepics.com/pictures/2212361/

Dave
http://www.bikepics.com/pictures/2212361/

Title: Re: Help Identifying part - No clutch after re-ass
Post by verslagen1 on 05/22/11 at 16:56:00

The rod is for the clutch, goes in the center.

Title: Re: Help Identifying part - No clutch after re-ass
Post by ocdave on 05/22/11 at 20:06:13

6F7C6B6A75787E7C7728190 wrote:

The rod is for the clutch, goes in the center.

Thanks, I'll re-open the right side cover and hopefully get the clutch working.

Title: Re: Help Identifying part - No clutch after re-ass
Post by justin_o_guy2 on 05/22/11 at 22:19:39

I knew what part would show up when I clicked the link,, & th laughter that followed was not meant to be mean, honest.. :)

Title: Re: Help Identifying part - No clutch after re-ass
Post by CalisOsin on 05/23/11 at 09:10:27

332C2A2D30370636063E2C206B590 wrote:

I knew what part would show up when I clicked the link,, & th laughter that followed was not meant to be mean, honest.. :)

same here... and only because I did the exact same thing! Live and learn.