SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Header gasket /cgi-bin/YaBB.pl?num=1305847358 Message started by Edgar on 05/19/11 at 16:22:37 |
Title: Header gasket Post by Edgar on 05/19/11 at 16:22:37 I removed the header recently to wrap it and the old gasket was no good. Is the make your own gasket stuff at autozone reliable enough or should I just order an oem gasket? Thanks |
Title: Re: Header gasket Post by MotoBuddha on 05/19/11 at 17:13:50 The gasket is about 1/8" to 3/16" thick and, I think, designed to collapse a bit when tightened. It would be a good trick to cut a ring that narrow and precise. |
Title: Re: Header gasket Post by Morgii on 05/19/11 at 18:00:26 The head gasket is 30 bucks.... better safe than sorry IMHO. |
Title: Re: Header gasket Post by verslagen1 on 05/19/11 at 18:38:13 he's talking about a header gasket... about $4 |
Title: Re: Header gasket Post by Morgii on 05/19/11 at 19:44:57 243720213E3335373C63520 wrote:
Ooops. ;D |
Title: Re: Header gasket Post by Edgar on 05/19/11 at 20:15:26 I'll head over to lowes and see what they have to work with. If nothing I'll try the make a gasket stuff |
Title: Re: Header gasket Post by justin_o_guy2 on 05/19/11 at 20:41:00 Id buy one. Ive seen them, understand how they work, crushing to fit. I know how much hassle it'd be to make one..& to see it fail & need replaced.. this isnt the place to invest ones time to save 4 bux.. or even 24 bux,, Id buy it,, |
Title: Re: Header gasket Post by Edgar on 05/20/11 at 01:45:04 You're right jog, found one on eBay for $5 shipped ;) |
Title: Re: Header gasket Post by EJID on 05/20/11 at 13:31:09 59787B7D6E1C0 wrote:
Must've ordered the same one I just did... 8-) http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_trksid=p4712.m2000054&item=170567247662&viewitem= |
Title: Re: Header gasket Post by Edgar on 05/20/11 at 14:41:49 Yes indeed ;D |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |