SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> bobber build. /cgi-bin/YaBB.pl?num=1305654135 Message started by sillydilly on 05/17/11 at 10:42:15 |
Title: bobber build. Post by sillydilly on 05/17/11 at 10:42:15 been doing it for about a month now, have all the pics but never really blogged it. thinking of adding the pics to show progress. http://img541.imageshack.us/img541/430/sany2624.jpg That is how it sits right now. http://img687.imageshack.us/img687/3163/mockupss.jpg That is a weak photoshop mockup of how the paint/tan springer/heat wrap should look. The only things Ive done to the bike so far: Paint jug flat black/head gloss Vegas Victory stock bars Custom fender Lowered 1.75" with hard tail chain struts and what ive got planned: 2inch chrome risers Tan springer seat Cone air filter exhaust heat wrap bar end signal lights small tail light anyone got any suggestions/comments? |
Title: Re: bobber build. Post by DangMan on 05/17/11 at 10:48:38 Awsome :) Cool build. Nice touch with the blasting/painting cabinet in the bavkground 8-) |
Title: Re: bobber build. Post by babyhog on 05/17/11 at 13:19:05 Lookin good! That's not the stock headlight, is it? Looks a bit longer, unless my eyes are failing me. Do you know what it is? |
Title: Re: bobber build. Post by sillydilly on 05/17/11 at 13:38:42 Im pretty certain its stock! |
Title: Re: bobber build. Post by Edgar on 05/17/11 at 13:46:39 My suggestion would be to ditch the stock muffler. Looking good though |
Title: Re: bobber build. Post by ROB CYCLE on 05/17/11 at 14:11:41 http://img1.classistatic.com/cps/kj/110517/561r1/11792ja_20.jpegMY BIKE BUILD |
Title: Re: bobber build. Post by ROB CYCLE on 05/17/11 at 14:20:01 I WAS BUILDING MINE FOR ABOUT MONTH CUSTOM FORWARD CONTROL WELDED REAR STRUTS NOW MY KICK STAND IS TUCKED UNDER FRAME WIRING IS IN AIR BOX |
Title: Re: bobber build. Post by ROB CYCLE on 05/17/11 at 14:27:55 http://img1.classistatic.com/cps/kj/110517/563r5/8969fmf_20.jpegI ALSO WENT TO A CHAIN HAD TO MOD. BCB SEAT KIT SO REAR TIRE WOULD FIT.CHOP THIER FENDER EVEN MORE AND CHANGE HOW STRUTS ATTACH TO FRAME. |
Title: Re: bobber build. Post by marty62253 on 05/17/11 at 17:18:51 I have black heat wrap and paint. also a short Indian muffler with supertrapp guts - all new, never used from an old build i gave up on last year. I think they would add a very special something to this bobber. Interrested? |
Title: Re: bobber build. Post by PerrydaSavage on 05/18/11 at 00:19:32 Man that looks SICK with the WW on the rear! Nice job!! A set of white bicycle-style grips would set off those bars too! 8-) |
Title: Re: bobber build. Post by sillydilly on 05/18/11 at 00:33:41 way to grab all the glory, Rob! :'( but very nice bike. |
Title: Re: bobber build. Post by ROB CYCLE on 05/18/11 at 15:14:40 SORRY DUDE JUST WANTED TO BRING SOME FRESH IDEAS TO THE FORUM . |
Title: Re: bobber build. Post by Smokestack on 05/18/11 at 16:36:42 I like it! I'd just hammer on a clear coat to seal the deal, and call it done. But I like raw steel an' stuff....... |
Title: Re: bobber build. Post by BurnPgh on 05/18/11 at 16:47:37 clean. Seen many people do way more work and end up with a finished product that doesnt look half as good. good job. |
Title: Re: bobber build. Post by sillydilly on 05/18/11 at 22:03:54 Thanks! I like the steel look as well, but there is too many imperfections in all the steel to keep it like that, so Im going to powdercoat it satin black |
Title: Re: bobber build. Post by ROB CYCLE on 05/19/11 at 15:33:54 i used john deer blitz black with a flat clear.the clear gives you a colour between satin and flat . |
Title: Re: bobber build. Post by sillydilly on 05/19/11 at 17:43:15 Ive got satin black powder on its way. Im gunna try to powdercoat the tank |
Title: Re: bobber build. Post by ROB CYCLE on 05/22/11 at 16:13:56 MORE PICS OF FRONT REAR http://img1.classistatic.com/cps/kj/110525/590r6/4034376_20.jpeghttp://img1.classistatic.com/cps/kj/110525/591r1/26237mj_20.jpeg |
Title: Re: bobber build. Post by wesley on 05/24/11 at 21:14:25 534E43514844534244210 wrote:
could you tell me where you got the tires? and what size are they? thanks |
Title: Re: bobber build. Post by ROB CYCLE on 05/25/11 at 14:10:59 tire is 150/90-15 i purchased it from shop who had it sitting on display.its a discontinued maxxis. |
Title: Re: bobber build. Post by sillydilly on 05/31/11 at 01:34:00 powder coating gun and powder came in today. needless to say... some nail clippers, a pop can, and an old headlight bucket I was confident enough to start coatin. took apart the master cylinder and grinded down the brake lever. did the side covers as well. http://img834.imageshack.us/img834/4789/sany2730c.jpg http://img844.imageshack.us/img844/5550/sany2733.jpg |
Title: Re: bobber build. Post by babyhog on 05/31/11 at 11:01:22 Looks like those turned out very nice! |
Title: Re: bobber build. Post by ROB CYCLE on 06/01/11 at 12:37:54 starting next phase to my build ,springer front end ,want to change tank any idea's on a style of tank. anyone have the length of xs650 fork neck thanks |
Title: Re: bobber build. Post by ROB CYCLE on 06/03/11 at 14:15:59 can anyone tell me what parts are needed when boring a engine. where do you purchase stage 2 cam |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |