SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> header bolts
/cgi-bin/YaBB.pl?num=1305066792

Message started by BurnPgh on 05/10/11 at 15:33:12

Title: header bolts
Post by BurnPgh on 05/10/11 at 15:33:12

Have my bike at school currently being painted. Some sh*thead decided to swipe some small bits and peices, among them, one of my exhaust header bolts. Anyone know offhandedly the size, thread pitch, length? Didnt think to bring the remaining one home, just locked all my stuff up and i havent got class again until friday.

Title: Re: header bolts
Post by IN-S40 on 05/11/11 at 07:40:45

This is the description off of one of the parts fiche.

BOLT (8X35)
09104-08026 $2.28

http://www.partshark.com/fiche_section_detail.asp?section=298930&category=Motorcycles&make=SUZUKI&year=2005&fveh=7222

Title: Re: header bolts
Post by MotoBuddha on 05/11/11 at 09:27:12

Meaning it's an 8mm bolt that's 35mm long.

Title: Re: header bolts
Post by BurnPgh on 05/11/11 at 14:18:44

okay...thread pitch? 1? 1.25?

Title: Re: header bolts
Post by justin_o_guy2 on 05/12/11 at 01:37:51

6354534F714649210 wrote:

Some people are just a-holes..

Title: Re: header bolts
Post by MotoBuddha on 05/12/11 at 08:57:35

7047405C62555A320 wrote:

okay...thread pitch? 1? 1.25?

M8 flange head bolts, like the ones used on the Savage, are almost always 1.25mm pitch. Non-flange head, and socket head M8 bolts are almost always 1.5mm pitch.

Flange head bolts make washers unnecessary.

Title: Re: header bolts
Post by ralfyguy on 05/12/11 at 10:42:51

Flange head bolts also usually have a higher tensile strength rating. Most of them are rated 10.9 versus regular hex head and socket head are usually 8.8.

Title: Re: header bolts
Post by BurnPgh on 05/12/11 at 14:29:27

544B4D4A5750615161594B470C3E0 wrote:

[quote author=6354534F714649210 link=1305066792/0#0 date=1305066792]Have my bike at school currently being painted. Some sh*thead decided to swipe some small bits and peices, among them, one of my exhaust header bolts. Anyone know offhandedly the size, thread pitch, length? Didnt think to bring the remaining one home, just locked all my stuff up and i havent got class again until friday.

Some people are just a-holes..[/quote]

Yea, some people are. I've got a pretty good idea who it is though, and I'm frankly fed up with him. If I can prove it was him im just going to knock him the fuhq out. He needs it for his own good. He's widely known to steal, destroy, and vandalize other peoples personal property, and school equipment. No cameras in the shop so administartion wont/cant pursue it. This is not the first issue I've had with this kid. He's a typical stuck up spoiled white suburbanite with a rich lawyer daddy and a enabling mother. He doesn't DO anything. Doesnt even bother to get into shop clothes, just causes trouble.

In school being an a$$hole - you're rebellious and cool.
In real life being an a$$hole - you get knocked out.

Hard lesson to learn, but I dont mind being the teacher.

Title: Re: header bolts
Post by justin_o_guy2 on 05/12/11 at 14:42:34

Leave him some bait & hope you can catch him/