SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Need to buy a new are used carburetor
/cgi-bin/YaBB.pl?num=1304386432

Message started by prototype5678 on 05/02/11 at 18:33:52

Title: Need to buy a new are used carburetor
Post by prototype5678 on 05/02/11 at 18:33:52

Need to buy a new are used carburetor. Does anyone know where I can buy one for a 2006 ls650s40 boulevard. Mikuni BS40 :'(

Title: Re: Need to buy a new are used carburetor
Post by BurnPgh on 05/02/11 at 21:04:58

i got one for you but what makes you think you need a new one?

cavaet - It's used. Clean inside with the usual tarnish outside. The mixture screw is a bit buggered up but still adjustable. The screws for the top cover are a bit buggered up from the very first time i removed it. After the first time i never had any trouble removing them. I can get some new screws/ hex bolts if you' d like. Also have a Lancer jet set if you're interested. Jetting at the moment isnt stock but i can put it back to stock if you like.

Title: Re: Need to buy a new are used carburetor
Post by prototype5678 on 05/03/11 at 04:24:05

I need one because of the mix screw is frozen inside mine and i am having no luck getting it out. I am going to try one more option but i am feeling very doubtful at this time about it coming out and getting another one is my only other option. So if I need it i already have a stage three jet kit in this one so i wouldnt need that thanks though but what do you want for your carb?

Title: Re: Need to buy a new are used carburetor
Post by drums1 on 05/03/11 at 06:26:05

I have same problem--screw is frozen and slot is boogered up. My local dealer told me he can heat it up and usually get it out--then replace with new screw. It will cost a few bucks, but probably cheaper than a new carb.

Title: Re: Need to buy a new are used carburetor
Post by MotoBuddha on 05/03/11 at 07:33:35

Before you go heating anything up and possibly damaging rubber parts or de-soldering the floats, try some of this stuff.

http://i280.photobucket.com/albums/kk182/motobuddha/8cc30734.jpg

Title: Re: Need to buy a new are used carburetor
Post by justin_o_guy2 on 05/03/11 at 09:34:55

Pull rubber parts first

Title: Re: Need to buy a new are used carburetor
Post by prototype5678 on 05/03/11 at 10:31:19

I have tried all these things and I realy think yall for help. I am at the end of the road with this carb and really need another one. If someone has one plezzzz throw me a price. Thankx

Title: Re: Need to buy a new are used carburetor
Post by drums1 on 05/03/11 at 16:21:20

Oh ya, if I go to dealer, I will disassemble 1st--I'd just bring him the shell. The slot on mine is so boogered up, and it's froze like a biotch, it's gonna take heat and a fat blade screwdriver, skinny enough to fit in the hole, to get it out. I'll probably have that done before I take it in for tires and head gasket. That way also, if he screws it up worse, he'd have to fix it somehow.

Title: Re: Need to buy a new are used carburetor
Post by Max_Morley on 05/03/11 at 17:46:58

Left hand drill bit and reversing drill should work to break it loose and back it out. If you are good with a bench grinder you can reverse sharpen a standard RH drill bit. Once it starts to drill,bear down some so it will catch and jam backing the screw out. Max