SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Broomstick handlebars?
/cgi-bin/YaBB.pl?num=1304369088

Message started by mr. s on 05/02/11 at 13:44:47

Title: Broomstick handlebars?
Post by mr. s on 05/02/11 at 13:44:47

Where can I get broomstick handlebars cheap? Black is preferred, but I can always paint them. Is there a certain size that is recommended for the Savage?

Title: Re: Broomstick handlebars?
Post by sillydilly on 05/02/11 at 14:01:19

Im pretty sure just 1 inch tubing will work. Ask your local machinist for a length of tubing

Title: Re: Broomstick handlebars?
Post by verslagen1 on 05/02/11 at 14:02:35

Go down to the local weight room, do some curls with a likely bar and walk out the door.

Since they're straight any steel house will do.

1" diameter, 30" long.

Title: Re: Broomstick handlebars?
Post by arteacher on 05/02/11 at 14:29:48

I wanted chromed so I bought a 29" broomstick from Flanders. I thought about a 26", but glad I got the 29" because with the 26" and the stock risers the brake line banjo fitting would have interfered with the risers. BTW if you are going to use anything less than a 5" riser you might interfere with the tank.

Title: Re: Broomstick handlebars?
Post by mr. s on 05/02/11 at 15:18:15

I guess it does not matter what the ends look like since they will be covered up?
So it really is just a normal straight pipe?
Thanks for the info.