SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Cafe >> Wheel hub bearing on 4x4 truck /cgi-bin/YaBB.pl?num=1303149772 Message started by Chopped on 04/18/11 at 11:02:52 |
Title: Wheel hub bearing on 4x4 truck Post by Chopped on 04/18/11 at 11:02:52 My driver side wheel bearing is going bad on me. The truck is my only means of transportation right now. I won't be able to get the parts till tomorrow and fix it Wednesday.... should I keep driving on it? I am getting rubbing when I turn right and some noise when I drive straight. There is no wobble in the tire that I can feel. I only have about 75-100 miles to drive it before I can actually fix it. I just wish I had time to get the stuff today... darnit! |
Title: Re: Wheel hub bearing on 4x4 truck Post by Serowbot on 04/18/11 at 11:09:01 Are those questions rhetorical?... No you shouldn't,.... but if you have to you will,... and if it fails you'll be sorry... :-?... |
Title: Re: Wheel hub bearing on 4x4 truck Post by youzguyz on 04/18/11 at 12:00:19 4x4 = CV joints in the front.. right? I wouldn't be so sure it's a wheel bearing until you can at least jack it up and spin it to see if you can tell where the noise and/or play is coming from. (Maybe you already did that..) I'm not a mechanic.. I'm just sayin.... |
Title: Re: Wheel hub bearing on 4x4 truck Post by Chopped on 04/18/11 at 12:16:21 Well I have driven with bad CV joints before. With minimal issues. I have already jacked up the truck and took the wheel off. The friction is coming from the wheel hub. Initially I thought it was the rotor... but its not! |
Title: Re: Wheel hub bearing on 4x4 truck Post by justin_o_guy2 on 04/18/11 at 16:06:08 Ho far to work? 200 miles? Park IT, dude,, 5 miles? Ooze along, go slow, dont listen to the radio, pay attention.. got a friend at work? |
Title: Re: Wheel hub bearing on 4x4 truck Post by Chopped on 04/18/11 at 20:43:34 well took the wheel up off... there wasn't a lot of play in it until I actually took everything apart! Good thing I managed to get to it tonight! The hub bearing actually fell apart! No damage to the drive shaft or hug. so 1 new hub assembly and 1 new torque wrench.... DONE SIR DONE! Can't believe how much quieter my truck is... well louder now that I can here the flowmasters better! |
Title: Re: Wheel hub bearing on 4x4 truck Post by justin_o_guy2 on 04/19/11 at 07:52:22 Well, thats gotta be a load off yer mind.. good that you got to it before it tore up Mo Stuff.. |
Title: Re: Wheel hub bearing on 4x4 truck Post by buttgoat1 on 04/19/11 at 13:34:43 what kind of truck? I know that the Dodges with "unit" bearings tend to chew them up on a regular basis. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |