SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> 17mm Spark Plug socket? /cgi-bin/YaBB.pl?num=1302795222 Message started by LostMohican on 04/14/11 at 08:33:42 |
Title: 17mm Spark Plug socket? Post by LostMohican on 04/14/11 at 08:33:42 I'm having a hard time tracking down the right spark plug socket for my 87 Savage. The Clymers book says 17mm. And what size spark plug should I be looking for? Am I missing something? |
Title: Re: 17mm Spark Plug socket? Post by Arnold on 04/14/11 at 08:39:27 If I am correct, the spark plug is most likely not metric, that'd be 11/16 instead. |
Title: Re: 17mm Spark Plug socket? Post by Fuzzy5150 on 04/14/11 at 09:06:18 It is a 17mm. None of the 'standard' spark plug sockets that you get at the auto store will work. Just get a 17mm deep well socket. Cut a short section from a rubber spark plug boot and glue into the bottom of the socket. This will hold the spark plug in place so it doesn't fall out. |
Title: Re: 17mm Spark Plug socket? Post by justin_o_guy2 on 04/14/11 at 09:21:56 Blow the crap outta th hole before you pull the plug,, Thin wall sockets are available at the Big Box stores, in the lawn & garden stuff.. I keep a spark plug boot handy, once the plug is oose, stick the boot on & use that to spin it out, use that boot to start it back in,, anti sieze is your friend. |
Title: Re: 17mm Spark Plug socket? Post by Fuzzy5150 on 04/14/11 at 11:36:01 Good advice to blow out the hole for sure! I just take it for granted that everyone knows to use anti-seize, but definitely use anti-seize.....more is better than less. |
Title: Re: 17mm Spark Plug socket? Post by mcentric on 04/14/11 at 12:26:57 The NGK- DPR8EA-9 plug is 11/16" or 18mm Mikael |
Title: Re: 17mm Spark Plug socket? Post by verslagen1 on 04/14/11 at 17:24:17 4B6F6D67636A060 wrote:
11/16" = .688 18mm = .708 I got a worn out 11/16 that'll fit the plug, but very tight. Go to a lawnmower store, look for one stamped out of steel tube. |
Title: Re: 17mm Spark Plug socket? Post by Boofer on 04/14/11 at 17:47:55 Auto Zone has an 18 mm that's slim enough to fit. I think mine is 3/8 drive and cost around $5. |
Title: Re: 17mm Spark Plug socket? Post by mcentric on 04/14/11 at 21:41:07 ...or for us metric users, 11/16" = 17.46mm. So unless your 17mm socket is modified it probably won't fit. I bought an 18mm spark plug socket at our equivalent to Harbour Freight/Grizzly here in Norway and it works a charm. But I don't know available that would be in the states. Mikael |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |