SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> An odd one for yall! /cgi-bin/YaBB.pl?num=1301070695 Message started by Chopped on 03/25/11 at 09:31:35 |
Title: An odd one for yall! Post by Chopped on 03/25/11 at 09:31:35 I want to replace the front end on my Harley. I have a Paughco springer on my savage with 1" neck cups. I want to take that springer off and put it on my harely... basically swap them. Anyon know where I can get neck cups that will fit my Harley stock frame (79) and work with the 1" beck bolt and vise versa for the Paughco frame to accept the 7/8" neck bolt from the harley front end? |
Title: Re: An odd one for yall! Post by justin_o_guy2 on 03/25/11 at 11:19:49 Paughco may know that answe.. |
Title: Re: An odd one for yall! Post by Chopped on 03/25/11 at 11:42:07 Yes.... but pulling answers from the A$$clown manufacturers is rough.... and pricey! |
Title: Re: An odd one for yall! Post by Demin on 03/25/11 at 13:46:23 Try a local shop.I think V-TWIN makes a conversion kit to run a big twin front on a Sporty. |
Title: Re: An odd one for yall! Post by Demin on 03/25/11 at 13:48:06 Just send me the springer and just put the right frontend back on you,you bad customizer.Shame on you. ;D |
Title: Re: An odd one for yall! Post by einheit13 on 03/25/11 at 14:23:18 Jirehcycles.com , Debrix.com, Demoncycles.com, ebay.com, J&P cycles, DennisKirk.com, V-twin...your stock 79 stem is 15/16". Check here too.... http://xlforum.net/vbportal/forums/forumdisplay.php?f=7 |
Title: Re: An odd one for yall! Post by Chopped on 03/25/11 at 21:15:55 7B7A7276711F0 wrote:
I DECLARE SHENANIGANS!!!! I have to be different! It is my F-you to the guys riding in their Shorts and Pennie loafers! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |