SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Harbor Freight Torque wrench /cgi-bin/YaBB.pl?num=1299541152 Message started by drums1 on 03/07/11 at 15:39:11 |
Title: Harbor Freight Torque wrench Post by drums1 on 03/07/11 at 15:39:11 My advice: spend a few extra dollars and get one somewhere else. One that actually works. I got the 3/8 5-80 foot pound model. (They didn't have an inch pound or a newtonmeter one) As I was tightening the side cover...in stages...I wasn't really feeling a click. I am sure I have overtightened the bolts. Glad I didn't snap any off while waiting for the stupid thing to click. What's my best bet now....pull the dam thing off again and buy a real torque wrench, or leave it as is and hope it don't leak? (They're all good and tight, that's for sure) |
Title: Re: Harbor Freight Torque wrench Post by sbaugz on 03/07/11 at 16:27:49 I put mine on recently without a torque wrench. I am sure I probably overtightened too. My plan is to leave it for now and replace if it leaks. |
Title: Re: Harbor Freight Torque wrench Post by Reelthing on 03/07/11 at 16:56:55 There's several in the box - from snap-ons to old craftmans to newer china made stuff - I've sure been know to test them against each other with a bolt and a couple nuts before going at something critical - as even a snap-on can screw up. |
Title: Re: Harbor Freight Torque wrench Post by stinger on 03/08/11 at 00:09:57 I bought a grinder from them recently and one of the shafts was missing a bolt to hold the wheel on. I thought no big deal. No metric or standard bolt would fit it. It was made special just for that shaft. I would have had to order it and it could have taken months. I just made them give me my money back. |
Title: Re: Harbor Freight Torque wrench Post by justin_o_guy2 on 03/08/11 at 10:18:06 Ive swapped stuff for new stuff & Ive gottn refunds when their stuff was crappy. Ill buy things there, but I wouldnt want a torque wrench from there. A beam style, yea, but not Clicker. You an get a 3/8 beam from Sears for 30 bucks. |
Title: Re: Harbor Freight Torque wrench Post by babyhog on 03/08/11 at 13:00:58 I get emails from Harbor Freight and it appears they are having a huge Tent Sale this coming weekend. I won't swear if its my area, or all areas. Can't really determine from the email or their website. But it said most items 80% off! |
Title: Re: Harbor Freight Torque wrench Post by drums1 on 03/09/11 at 08:11:28 Ya we got there here too. 80% off--what the stuff should really cost to begin with. |
Title: Re: Harbor Freight Torque wrench Post by verslagen1 on 03/09/11 at 14:12:56 if you are concerned with the accuracy of your torque wrench, It's very easy to check, a fish scale, a ruler and a calculator. measure the distance from the center of the drive to the indicator on the handle. Divide the torque requirement by that number. Pulling at a right angle to the handle, use the fish scale to apply the calculated force at the mark in the handle to torque something. |
Title: Re: Harbor Freight Torque wrench OT now Post by Max_Morley on 03/09/11 at 16:22:56 Just bought the HF 4 drawer roll around cart for $99. with a coupon from the one of the current cycle magazines. Smooth full full drawers and HD construction. IMHO a great deal and way to organize and secure your motorcycle tools. Max |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |