SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> How do you seafoam a carb when bikes not running? /cgi-bin/YaBB.pl?num=1299530394 Message started by Jahoo on 03/07/11 at 12:39:54 |
Title: How do you seafoam a carb when bikes not running? Post by Jahoo on 03/07/11 at 12:39:54 I bought some seafoam spray, but my bike doesn't start. How do i clean the carb with seafoam? |
Title: Re: How do you seafoam a carb when bikes not runni Post by MotoBuddha on 03/07/11 at 13:11:06 Take it apart? |
Title: Re: How do you seafoam a carb when bikes not runni Post by verslagen1 on 03/07/11 at 14:03:29 Here's bill's website... http://www.seafoamsales.com/how-to-use-sea-foam-spray.html normally, we use the liquid form, and just pour it into the carb bowl. |
Title: Re: How do you seafoam a carb when bikes not runni Post by Jahoo on 03/07/11 at 18:35:10 I may go out and buy the liquod form jsut cause it seems easier |
Title: Re: How do you seafoam a carb when bikes not runni Post by MotoBuddha on 03/08/11 at 04:42:40 If you're going to buy something else, and you're willing to take the carb off the bike, try this: http://i280.photobucket.com/albums/kk182/motobuddha/8cc30734.jpg It comes in a gallon can. You drop the carb in to soak. It can go in looking like this... http://i280.photobucket.com/albums/kk182/motobuddha/8a893bb4.jpg ...and come out looking like this. http://i280.photobucket.com/albums/kk182/motobuddha/852fca86.jpg |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |