SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Highway Hawk 4" Risers and Drag Bar /cgi-bin/YaBB.pl?num=1299475964 Message started by Bubbasan on 03/06/11 at 21:32:44 |
Title: Highway Hawk 4" Risers and Drag Bar Post by Bubbasan on 03/06/11 at 21:32:44 I don't know about everyone else but I had trouble locating a set of risers that I knew would go on without modding. The sellers don't seem to provide much specific information about bolt sizes and other details. And if you call them you just get a sales guy that can't answer the questions. Anyway I thought I would share this. I bought a pair of Highway Hawk 4" risers, model# HH-56-0341, from CruiserCustomizing.com. They were a little pricey at just under $105 shipped but they went on and look great. These mount with 10mm bolts that come with the risers. They come with shims for 7/8" bars and some other washer parts that I didn't need. NOTE: If you order these make sure you are ordering the 10mm version because they make a 12mm and it is easy to get confused. I also bought 1" drag bars from J&P for $39. They are 27 7/8" with 3 7/8" pullback. Here are the pics. http://p1.bikepics.com/pics/2011%5C03%5C06%5Cbikepics-2164527-800.jpghttp://p1.bikepics.com/pics/2011%5C03%5C06%5Cbikepics-2164528-800.jpghttp://p1.bikepics.com/pics/2011%5C03%5C06%5Cbikepics-2164530-800.jpg I was thinking of shorter risers but these seem to be about as short as you can go without controls hitting. Besides these are comfortable. They have a pullback but it is not listed. Probably about an inch. I'm really happy with them. Everything bolted right on. Still have to dress my cables. |
Title: Re: Highway Hawk 4" Risers and Drag Bar Post by 2whlthrpy on 03/08/11 at 05:22:38 Very nice bubbasan! I am looking for just that info for my 2003 gz250. Bars on the gz are 7/8. Thanks for sharing. |
Title: Re: Highway Hawk 4" Risers and Drag Bar Post by bluesrockdoc on 03/08/11 at 12:03:09 Thanks for posting the info, just what I've been looking for. Dave |
Title: Re: Highway Hawk 4" Risers and Drag Bar Post by Mario Verasso on 09/27/11 at 00:30:06 Very nice look... I was inspired by these but wanted 6 in. risers. They have too much pull back for me, so i ordered these---->http://www.meancycles.com/store/parts/view.cfm?partID=218059 & the similar bar as yours.----->http://www.meancycles.com/store/parts/view.cfm?partID=209642 |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |