SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> new hand controls, old electrical system
/cgi-bin/YaBB.pl?num=1299011944

Message started by bobber_prjct_2010 on 03/01/11 at 12:39:04

Title: new hand controls, old electrical system
Post by bobber_prjct_2010 on 03/01/11 at 12:39:04

has anyone ever tried putting newer controls ('95) on an older electrical system ('86)? The new controls have an actual switch in the front break lever controls, while the old has just a "contact" switch. My issue is that the new controls have a different harness than what is on the older system. In other words, it has an extra wire for the newer switch...

Any help would be appreciated!

Sorry if this is a rookie question.... :-/

Title: Re: new hand controls, old electrical system
Post by thumperclone on 03/01/11 at 14:06:16

couple three months ago some one here did it, there are more wires on the newer bikes
"anything can be made to fit if the hammer is big enough"

an SSM would be a good investment