SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> help with starter clutch gears- pics please?? /cgi-bin/YaBB.pl?num=1297956870 Message started by sbaugz on 02/17/11 at 07:34:30 |
Title: help with starter clutch gears- pics please?? Post by sbaugz on 02/17/11 at 07:34:30 I took my generator off. I am having a tough time figuring out how the starter clutch gears are installed back on there. THe clymer manual isn't all that helpful. Specifically, I can't figure out which way the starter clutch gear #2 goes on and I don't know which gear these two little washers go on. I thought it was gear #1 according to clymer manual, but then it does not look like it meshes right with gear #2. I was thinking maybe a photo of one would help. THanks. |
Title: Re: help with starter clutch gears- pics please?? Post by verslagen1 on 02/17/11 at 08:34:30 I beleave they go on either side of the gear with 2 different sizes. If that's wrong, the starter won't turn. |
Title: Re: help with starter clutch gears- pics please?? Post by kernel ken on 02/17/11 at 11:57:19 You could also try going to www.cheapcycleparts.com, select the year Savage you have and look at the illustrated parts breakdown. You might be able to see the assembly sequence a little better. |
Title: Re: help with starter clutch gears- pics please?? Post by sbaugz on 02/17/11 at 11:59:30 I checked cheapcycleparts too. I assembled the way it appears based on the clymer and the diagram on cheapcycleparts, but something just seems a little off. THe gears don't appear to mesh right. Was hoping to see a pic maybe off someone's bike. |
Title: Re: help with starter clutch gears- pics please?? Post by Flemming from Denmark on 02/19/11 at 15:02:34 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1288911670/0#7 Some pic's and talk about the starter clutch - maybe not so usefull for you |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |