SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> anyone ever replace the oil level sight window? /cgi-bin/YaBB.pl?num=1297464962 Message started by sbaugz on 02/11/11 at 14:56:02 |
Title: anyone ever replace the oil level sight window? Post by sbaugz on 02/11/11 at 14:56:02 I am getting the clutch cover powder coated and the people doing it want me to take out the oil level window. I can order a new one for about $11 but am looking for advice from someone who has done this. How do I go about getting it out? What do I use to seal the new one in place after its powder coated? Thanks. |
Title: Re: anyone ever replace the oil level sight window Post by verslagen1 on 02/11/11 at 15:08:25 I had to seal one back in place once. simply peel the RTV out and push the glass thru. to replace, use the same RTV you use for the head cover. |
Title: Re: anyone ever replace the oil level sight window Post by sbaugz on 02/11/11 at 15:47:56 thanks. does the glass come out through the front or back? |
Title: Re: anyone ever replace the oil level sight window Post by verslagen1 on 02/11/11 at 18:32:14 from the inside |
Title: Re: anyone ever replace the oil level sight window Post by sbaugz on 02/12/11 at 05:07:25 not sure why i was making a big deal of this. I used a screwdriver to dig the gasket material out. The oil level window just popped right out. Thanks for the advice. |
Title: Re: anyone ever replace the oil level sight window Post by MotoBuddha on 02/12/11 at 13:21:48 Speaking of RVT, here's an interesting document I fond about proper use and application. http://www.jasperengines.com/pdf/RTVAnaerobicSealerTB.pdf |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |