SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Throttle Cable /cgi-bin/YaBB.pl?num=1296290998 Message started by 23Skidoo on 01/29/11 at 00:49:58 |
Title: Throttle Cable Post by 23Skidoo on 01/29/11 at 00:49:58 A bit of advice if I may. If I turn my handlebars to the right my throttle increases slightly, not much but enough I reccon to fail my MOT. I can't see the throttle cable snagging on anything. Any ideas what could be causing it..? Thanks in advance AJ |
Title: Re: Throttle Cable Post by justin_o_guy2 on 01/29/11 at 01:36:10 Engine off, move bar left & right, watch the throttle on the carb. Reposition cable as it runs from bar to carb. Open throttle & release with bars in different positions. If throttle close speed changes, mess with it. |
Title: Re: Throttle Cable Post by verslagen1 on 01/29/11 at 08:31:26 mostly likely it's too tight from the control to the steering stem. |
Title: Re: Throttle Cable Post by 23Skidoo on 01/29/11 at 10:36:12 As ever thanks for the tips. I have a horrible feeling the bike is going to fail on Monday so don't be surprised if I suddenly start asking loads of daft questions.. My main concern is a slightly weeping fork seal.. but that is way out of my ability to sort out.. Thanks again and wish me luck AJ |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |