SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Mikuni carburetor /cgi-bin/YaBB.pl?num=1295046488 Message started by Jimmer on 01/14/11 at 15:08:08 |
Title: Mikuni carburetor Post by Jimmer on 01/14/11 at 15:08:08 Can some one tell me how to remove main nozzle from this carburetor. I bought a rebuilt kit, but no instructions with it. This is from a Yamaha timberwolf,1992 ATV. Seems like the people on a Yamaha form either don't know,or they do not share information like the people on our Savage form. This is my son wheeler and boy was his carburetor messed up. Any advise will help. |
Title: Re: Mikuni carburetor Post by verslagen1 on 01/14/11 at 23:22:56 what model mikuni is it? |
Title: Re: Mikuni carburetor Post by justin_o_guy2 on 01/15/11 at 04:24:51 http://www.shopsbt.com/pdfs/mikunisbn.pdf run this thru yer favorite search engine mikuni carburetor repair rebuild instructions |
Title: Re: Mikuni carburetor Post by Jimmer on 01/15/11 at 10:23:20 Verslagen1 This is a VM24SH/Mikuni carburetor. |
Title: Re: Mikuni carburetor Post by verslagen1 on 01/15/11 at 10:49:24 http://www.mikunioz.com/download/pdf_files/vmmanual.pdf this is a tuning manual, but it shows the jet. has a slot at the bottom so I'd think you would remove the main and push up to remove thru the slide. |
Title: Re: Mikuni carburetor Post by Jimmer on 01/15/11 at 14:31:34 Thanks for the information helped out a lot. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |