SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> lancer parts
/cgi-bin/YaBB.pl?num=1295038566

Message started by jonny hi 5 on 01/14/11 at 12:56:05

Title: lancer parts
Post by jonny hi 5 on 01/14/11 at 12:56:05

I am intrested in buying a stage one cam for my bike and a valslavy cam tensioner but I can not find either on ebay or a website. Help would be appreciated.

Title: Re: lancer parts
Post by MotoBuddha on 01/14/11 at 13:50:54

Try PMing LANCER about the cam.

The VerSlavy is in the marketplace: http://suzukisavage.com/cgi-bin/YaBB.pl?num=1180206459

Title: Re: lancer parts
Post by jonny hi 5 on 01/14/11 at 14:51:17

Thanks for the verslavy info but if the lancer man reads this if you could leave me some info how to get a hold of a cam and performance carb I would appreciate it by the way has anybody played with this new ryca kit if so how about some pics :)

Title: Re: lancer parts
Post by MotoBuddha on 01/14/11 at 15:04:06

And the reason you don't want to PM Lancer is...........? It works. He answers my PMs. And if you PM me I'll send you some punctuation.

The Ryca kits aren't delivering yet, but soon.

Title: Re: lancer parts
Post by LANCER on 01/15/11 at 03:48:30

2E3C2B3E31333734590 wrote:

the stuff is in my ebay store
http://stores.ebay.com/savageperformance

Title: Re: lancer parts
Post by stinger on 01/16/11 at 22:07:10

I purchased the high performance cams from Lancer. Good investment! Bike runs stronger thru all the gears.

Title: Re: lancer parts
Post by BurnPgh on 01/18/11 at 10:54:21

7374696E676572000 wrote:

I purchased the high performance cams from Lancer. Good investment! Bike runs stronger thru all the gears.

+1. Added an extra 10mph to each gear. Now shifting easily out of first at 30-35mph instead of 20-25.

Title: Re: lancer parts
Post by T2 on 01/18/11 at 21:01:07

Stinger and BurnPgh, I see a Stage I and a Stage II on Lancers sale page; which did you use?
Terry (prepping for a RYCA)

Title: Re: lancer parts
Post by MotoBuddha on 01/18/11 at 21:14:30

I think it's stage 1 if you're keeping the stock carb and head pipe. It's also good if you're going with a higher compression piston. Stage two is if you're also doing head work, bigger carb and all that.

Title: Re: lancer parts
Post by stinger on 01/19/11 at 01:04:25

stage one here also. running stock carb altho rejetted and stock header. I do not know about a taller first gear. I have never used it. I start out in second always. Much faster off the line and it keeps the revs down.