SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Neutral wire question /cgi-bin/YaBB.pl?num=1294689522 Message started by ocdave on 01/10/11 at 11:58:42 |
Title: Neutral wire question Post by ocdave on 01/10/11 at 11:58:42 Finished the top end rebuild on my project Savage. I got the engine mounted yesterday. In the process my neutral wire which was hanging on by a thread managed to severe itself right at the end of the rubber boot coming out of the crankcase. I might have maybe a 1/4 of an inch of the wire sticking out of the crankcase boot. Any problem just soldering the wire back together? It appears to be a single polarity wire. Just curious, will the bike still run without this circuit completed? Thanks, |
Title: Re: Neutral wire question Post by verslagen1 on 01/10/11 at 17:19:32 Yep, just a single wire, switch goes to ground when in neutral. |
Title: Re: Neutral wire question Post by justin_o_guy2 on 01/10/11 at 21:06:18 Make sure you raise the stand. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |