SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Dimensions?
/cgi-bin/YaBB.pl?num=1294447195

Message started by danthewrenchingman on 01/07/11 at 16:39:55

Title: Dimensions?
Post by danthewrenchingman on 01/07/11 at 16:39:55

Does anybody know the exact dimensions of these saddle bag supports?

http://cgi.ebay.com/ebaymotors/SUZUKI-LS650-S40-SADDLEBAG-SUPPORTS-_W0QQcmdZViewItemQQhashZitem19b9652795QQitemZ110484596629QQptZMotorcyclesQ5fPartsQ5fAccessories

having a friend make me some, and he is hard to get motivated. I figure if i get these dimensions, he will start rolling

Title: Re: Dimensions?
Post by justin_o_guy2 on 01/07/11 at 21:38:15

You gonna want just the length of each run, angle of radius or are you gonna need the length of the flats & angle out & length of run & angle back the other way,, ? If you want the answers you are asking for, I suspect youll need the engineering drawings. Remember, mounting a bag, its just a bag, on the side of a motorcycle isnt a scientific endeavor.
Start with coathanger** & build a junky one. Get the lengths & angles like ya want it. Then grab the big wires.

**
Any light wire, strong enough to support itself, take some light abuse, etc, You can hold the wire up & your pahdnuh can hold the bags & see how its gonna look.
Adj to taste

Title: Re: Dimensions?
Post by verslagen1 on 01/07/11 at 21:59:07

http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1162559733

Title: Re: Dimensions?
Post by justin_o_guy2 on 01/07/11 at 22:56:29

Thats just amazing.

Title: Re: Dimensions?
Post by danthewrenchingman on 01/08/11 at 13:15:22

I will try a coat hanger, work it out to my needs. I also have a slew of them in my closet.

I have seen that post with the dimensions on it, but those are for an older model i believe, they dont slant down like the ones, i have a link for.

I would need all of the dimensions, JOG, end to end. But, i will try to work something out with a coat hanger

Title: Re: Dimensions?
Post by justin_o_guy2 on 01/08/11 at 23:45:01

Good luck Dan. And Have FUN messin with it, man.