|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> fork neck /cgi-bin/YaBB.pl?num=1292801344 Message started by ROB CYCLE on 12/19/10 at 15:29:04 |
|
Title: fork neck Post by ROB CYCLE on 12/19/10 at 15:29:04 can anyone tell me the fork neck size? |
|
Title: Re: fork neck Post by verslagen1 on 12/19/10 at 15:45:39 Big enough to eat a savage spindle. ;D What measurement do you need? |
|
Title: Re: fork neck Post by ROB CYCLE on 12/20/10 at 13:09:31 is the neck a 1 inch or 7/8 want to add springer forks |
|
Title: Re: fork neck Post by verslagen1 on 12/20/10 at 13:25:04 The spindle is 1.015" in diameter. |
|
Title: Re: fork neck Post by MotoBuddha on 12/20/10 at 13:43:35 And the bearing sizes are: Upper: 25 x 47 x 15 Lower: 30 x 55 x 17 |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |