SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> t-bar /cgi-bin/YaBB.pl?num=1292291810 Message started by greyhead51 on 12/13/10 at 17:56:50 |
Title: t-bar Post by greyhead51 on 12/13/10 at 17:56:50 has anyone ever put tbars on a savage if so which ones and what size will fit a savage? thanks in advance ;) |
Title: Re: t-bar Post by Serowbot on 12/14/10 at 11:03:17 Is a T-bar a drag bar?... or a broomstick bar?... I have drags,... 1" diameter, 27 wide... don't go less than 27"... 28 - 30" is better, especially if you are large... http://i600.photobucket.com/albums/tt82/serowbot/mlsavage002.jpg?t=1292353488 |
Title: Re: t-bar Post by greyhead51 on 12/14/10 at 14:43:41 i was looking at some at bikebandit.com would those fit and how far does it need to be between each riser? |
Title: Re: t-bar Post by CalisOsin on 12/14/10 at 15:43:09 I think he means something like this, but I don't know the answer to the question.... http://www.bikebandit.com/wild-1-physco-chubby-chopper-t-bar |
Title: Re: t-bar Post by MotoBuddha on 12/14/10 at 17:10:45 2530273B2A2723267773420 wrote:
You need the center-to-center distance on your bike, NOT the gap between the risers. That's not hard to measure. For example, you could measure from center-to-center on the handlebar riser bolt ends on the underside of the top triple clamp. |
Title: Re: t-bar Post by justin_o_guy2 on 12/14/10 at 17:15:56 outside of one to inside of the other = distance center to center. |
Title: Re: t-bar Post by Serowbot on 12/14/10 at 18:47:12 193B363329152933345A0 wrote:
http://www.bikebandit.com/assets/product_images/03BCWild21MD.gif $214.00 !!!... Jeepers!... I paid $20.00 for my drag bars, new on E-bay!... |
Title: Re: t-bar Post by PerrydaSavage on 12/15/10 at 00:19:14 Man that pic of serowbot's Bike arse on is dead sexy! 8-) |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |