SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Replace rear turn signal
/cgi-bin/YaBB.pl?num=1291318323

Message started by Baldeagle on 12/02/10 at 11:32:03

Title: Replace rear turn signal
Post by Baldeagle on 12/02/10 at 11:32:03

Will be replacing the left rear turn signal. (torn off while plowing up a man's front yard) . The big question is do I have to remove the rear wheel?? Hope this will be a strait forward replacement.

Title: Re: Replace rear turn signal
Post by babyhog on 12/02/10 at 11:52:37

Remove the rear wheel? Nope, but you have to remove the side rail, which can be a booger if you have big hands...

Title: Re: Replace rear turn signal
Post by thumperclone on 12/02/10 at 12:24:18

if you cant get your mitts in the fender well
you can unbolt one end of both shocks,jack the bike up from under the engine and let the swing arm sag to gain more space...

Title: Re: Replace rear turn signal
Post by wes on 12/02/10 at 13:02:04

I just removed a turnsignal and had to loosen the side rail. I also had to remove the bolts holding the sissy bar on.

Title: Re: Replace rear turn signal
Post by wayne929 on 12/02/10 at 17:11:40

i took mine off and mounter my blinkers to the side of my liscence plate. i have long skinny fingers and the only tough nut was the front one oppopsite of the exhaust side. the rest were easy.

Title: Re: Replace rear turn signal
Post by MotoBuddha on 12/03/10 at 08:53:58

When they build the bike, they start with the turn signals and build everything else around them.

Title: Re: Replace rear turn signal
Post by Baldeagle on 12/04/10 at 06:33:29

Thanks for the info folks. :) :)