SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> horn not working /cgi-bin/YaBB.pl?num=1289433862 Message started by carlostheobscure on 11/10/10 at 16:04:22 |
Title: horn not working Post by carlostheobscure on 11/10/10 at 16:04:22 My horn won't blow no matter how many times I push the button! Any troubleshooting advise? |
Title: Re: horn not working Post by ebonysresearch on 11/10/10 at 16:13:30 Do you have an ohm meter? Check the continuity of the switch, then look for power in and if the ground is good. If the switch is good. power in and a good ground its the horn...otherwise its one of the above |
Title: Re: horn not working Post by Lupo on 11/10/10 at 16:47:16 I've got a Fiamm on one of my bikes that if it sits a bit I just get a click sound. I shoot a squirt of WD40 in the horn outlet and it comes back to life. I suppose it rusts inside. |
Title: Re: horn not working Post by ebonysresearch on 11/10/10 at 17:26:59 Try some contact cleaner |
Title: Re: horn not working Post by Phelonius on 11/10/10 at 19:33:22 Check ground, also, has horn been immersed in water or pressure washed? Phelonius |
Title: Re: horn not working Post by justin_o_guy2 on 11/10/10 at 20:17:38 Apply 12 V to the horn directly. No buttons, nothing, just a wire, straigt from a hot wire. Or, use a test lite to see if you have V to the horn, if you dont have a V meter. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |