SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Anyone poke a hole in your Dyna? /cgi-bin/YaBB.pl?num=1287450596 Message started by jrm8486 on 10/18/10 at 18:09:56 |
Title: Anyone poke a hole in your Dyna? Post by jrm8486 on 10/18/10 at 18:09:56 Put my dyna on when I changed jets,but now I can't even here it run,I have 52.5 pilot and 152.5 main w/ half wh. spacer and air pod. I was wondering if I poke a hole for sound I'll have to re jet again. |
Title: Re: Anyone poke a hole in your Dyna? Post by Oldfeller on 10/18/10 at 18:15:13 Dyna's loosen up internally pretty quickly -- don't do anything to it. It will be roaring soon enough. |
Title: Re: Anyone poke a hole in your Dyna? Post by Serowbot on 10/18/10 at 18:23:58 Yup,.. I didn't do it on purpose,.. but after 16k miles she blew out the center baffle,... and it was way LOUD!..... Made it run crappy too... |
Title: Re: Anyone poke a hole in your Dyna? Post by jrm8486 on 10/18/10 at 18:35:12 may look for a jardine used,had one on my lasy s40 and loved it. |
Title: Re: Anyone poke a hole in your Dyna? Post by Ducklips on 10/20/10 at 14:15:40 i just took off a jardine and went back to a stock. I have one sitting around now. Quieter! |
Title: Re: Anyone poke a hole in your Dyna? Post by justin_o_guy2 on 10/20/10 at 14:24:04 I Better Not find out someones been pokin My Dyna.. |
Title: Re: Anyone poke a hole in your Dyna? Post by Edgar on 10/20/10 at 19:16:11 465741494E4B5251220 wrote:
Are you interested in selling that jardine??? PM me if so |
Title: Re: Anyone poke a hole in your Dyna? Post by Savage_Amusement on 10/21/10 at 07:37:16 I knocked a hole in it with a shaft we had at work. Don't know the size but it runs fine and sounds decent enough. |
Title: Re: Anyone poke a hole in your Dyna? Post by jrm8486 on 10/21/10 at 08:57:28 Knocked a small one in it this morning,couldn't resist.sounds better,if it fall apart I'll buy another. |
Title: Re: Anyone poke a hole in your Dyna? Post by babyhog on 10/21/10 at 12:48:22 5B435C09050907310 wrote:
Could you take a pic of what you did? I wish mine was a little louder too.... |
Title: Re: Anyone poke a hole in your Dyna? Post by Wolfman on 10/22/10 at 02:19:05 Whats the part number on the dyna mufflers you guys are useing? It sound better or worse then a sportster or supertrapp muff? |
Title: Re: Anyone poke a hole in your Dyna? Post by jrm8486 on 10/22/10 at 05:10:09 I don't think its much louder than stock but look much better,as for showing what I did,just put a screwdriver in and whacked it w/hammer.not sure of part# bought on ebay. |
Title: Re: Anyone poke a hole in your Dyna? Post by jabman on 10/23/10 at 10:03:48 part no 65388-95 |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |