SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> quick question /cgi-bin/YaBB.pl?num=1285104412 Message started by Trippah on 09/21/10 at 14:26:52 |
Title: quick question Post by Trippah on 09/21/10 at 14:26:52 A year and a half later, started to put Suzi's head back on. The locating dowels, are there two? They seem to receivew the crankcase studs. Since there are fiur studs, am I missing 2 dowels? (The box with bags spearating out the botls, nuts etc bacame a home for rodents this past winter, so many nuts bolts etc were in one big pile.) :-[ Thanks in advance.. |
Title: Re: quick question Post by verslagen1 on 09/21/10 at 14:44:57 There are 2, 1 same as crankcase covers, 1 smaller. from memory. |
Title: Re: quick question Post by Trippah on 09/21/10 at 15:18:44 Thanks, two were still in the head, one receiving the right front (shortest stud,) the other on the left rear (for one of the medium length studs.) Locating dowel seems a wrong term, more like a locating sleeve? Hope I have the right critters in place. Now I have the three larger copper washers, but the smaller one is AWOL. I wonder if there is a small furry animal in the yard that can't resist a magnet. ;D |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |